Characteristics Biobriquettes from Mushroom Baglog Waste Carbonization Production

Authors

  • Ika Nawang Puspitawati Department of Chemical Engineering, UPN ”Veteran” Jawa Timur Jl. Raya Rungkut Madya, Surabaya 60294, Jawa Timur, Indonesia
  • Kindriari Nurma Wahyusi Department of Chemical Engineering, Faculty of Engineering, Universitas Pembangunan Nasional “Veteran” Jawa Timur (UPN), Gunung Anyar, Surabaya 60294, Indonesia
  • Sintha Soraya Santi Department of Chemical Engineering, Faculty of Engineering, Universitas Pembangunan Nasional “Veteran” Jawa Timur (UPN), Gunung Anyar, Surabaya 60294, Indonesia
  • Suprihatin Department of Chemical Engineering, Faculty of Engineering, Universitas Pembangunan Nasional “Veteran” Jawa Timur (UPN), Gunung Anyar, Surabaya 60294, Indonesia
  • Erwan Adi Saputro Department of Chemical Engineering, Faculty of Engineering, Universitas Pembangunan Nasional “Veteran” Jawa Timur (UPN), Gunung Anyar, Surabaya 60294, Indonesia
  • Novel Karaman Master of Environmental Science, Engineering Faculty, Universitas Pembangunan Nasional "Veteran" Jawa Timur, Surabaya 60294, Indonesia

DOI:

https://doi.org/10.33005/ijeise.v4i1.112

Keywords:

Biobriquettes, Carbonization, Mushroom Baglog

Abstract

Bio briquette is a briquette based on agricultural waste because it is deliberately made from biomass charcoal. The utilization of agricultural waste such as mushroom planting media to be processed as bio briquette requires a very cheap cost. Bio briquettes that are processed properly and correctly, will produce high-quality briquettes. The purpose of this study was to produce a biobriquette from baglog mushroom waste and to determine the characteristics of the biobriquette. The research material used consisted of 400 grams of mushroom baglog waste and 40 grams of starch as adhesive. The briquette dough is then printed cylindrical. The printed briquettes are then heated at 80°C for 5 hours to reduce the moisture content. The result of smoke test is the smoke will stop in 17 seconds with the color of the smoke is white. The Combustion of speed test, the results obtained are 0,0019 gram/second with an initial sample weight of 2, 4 grams and burning for 20 minutes 35 seconds with a final sample weight of 0,387 grams. The result of ash content is 0.16%. This result is in accordance with the SNI issued by our government. SNI of ash content is max 8 %.

Downloads

Published

2023-10-05

How to Cite

Puspitawati, I. N., Wahyusi, K. N., Santi, S. S., Suprihatin, Saputro, E. A., & Karaman, N. (2023). Characteristics Biobriquettes from Mushroom Baglog Waste Carbonization Production. International Journal of Eco-Innovation in Science and Engineering (IJEISE), 4(1). https://doi.org/10.33005/ijeise.v4i1.112

Issue

Section

Articles

Most read articles by the same author(s)